Zyxel-communications P-2608HWL-Dx Series Manual de usuario Pagina 97

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 451
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 96
P-2608HWL-Dx Series User’s Guide
Chapter 7 WAN Setup 97
7.5.1 Advanced Internet Access Setup
To edit your ZyXEL Device's advanced WAN settings, click the Advanced Setup button in
the Internet Access Setup screen. The screen appears as shown.
Figure 47 Advanced Internet Access Setup
The following table describes the labels in this screen.
Max Idle Timeout Specify an idle time-out in the Max Idle Timeout field when you select Connect
on Demand. The default setting is 0, which means the Internet session will not
timeout.
Apply Click Apply to save the changes.
Cancel Click Cancel to begin configuring this screen afresh.
Advanced Setup Click this button to display the Advanced WAN Setup screen and edit more
details of your WAN setup.
Table 24 Internet Access Setup (continued)
LABEL DESCRIPTION
Table 25 Advanced Internet Access Setup
LABEL DESCRIPTION
RIP & Multicast
Setup
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Multicast IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a multicast group. The ZyXEL Device supports both IGMP
version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.
ATM QoS
Vista de pagina 96
1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 450 451

Comentarios a estos manuales

Sin comentarios