Zyxel-communications P-870MH-C1 Manual de usuario descargar pdf (Pagina 36)

Chapter 4 Introducing the FTP Server

P-870MH-C1 User’s Guide

3 Transfer the .bin file from the computer to the P-870MH-C1, and rename it to ras.

Wait for the P-870MH-C1 to reboot.

1 Do not interrupt the P-870MH-C1 while it is uploading new firmware or

rebooting after the upload. Interrupting the P-870MH-C1 might permanently

damage it.

When the P-870MH-C1 is ready again, you can log in to confirm that the P-870MH-C1 is

running the new firmware.

4.3 Back up the Current Configuration

On the P-870MH-C1, the current configuration is stored in the file called rom-0 (no

extension).

Follow these directions to back up the current configuration.

1 Log in to the device using FTP. See Section 4.1 on page 35.

2 Change the transfer mode to binary.

3 Transfer the rom-0 file from the P-870MH-C1 to the computer, and rename it if desired.

4.4 Restoring a Previously-saved Configuration

Follow these directions to restore a previously-saved configuration file from the computer to

the P-870MH-C1.

1 Log in to the device using FTP. See Section 4.1 on page 35.

2 Change the transfer mode to binary.

Figure 19 Example: Upload Firmware Using FTP

ftp> bin

200 Type I OK

ftp> put 350rt0b4.bin ras

200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 1079080 bytes sent in 2.83Seconds 380.76Kbytes/sec.

Figure 20 Example: Back up Current Configuration Using FTP

ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom

200 Port command okay

150 Opening data connection for RETR rom-0

226 File sent OK

ftp: 16384 bytes received in 0.13Seconds 125.07Kbytes/sec.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 73 74

Sin comentarios

Zyxel-communications P-870MH-C1 Manual de usuario Pagina 36