Zyxel-communications P-870MH-C1 Manual de usuario descargar pdf (Pagina 41)

P-870MH-C1 User’s Guide

CHAPTER 5

Introducing the Command

Interface

This chapter explains how to log in, use, and log out of the command interface in the P-

870MH-C1.

1 Refer to the release notes for your device for a complete list of commands

available. Use of undocumented commands or misconfiguration can damage

the unit and possibly render it unusable.

5.1 Starting the Command Interface (Logging In)

You can access the command interface via the SMT or Telnet.

5.1.1 Via the SMT

To access the CI from the SMT, enter 8 from Menu 24 — System Maintenance. Type “exit”

to return to the SMT main menu when finished.

Figure 22 Valid Commands

5.1.2 Via Telnet

Follow the steps below to log into the command interface via Telnet

1 Telnet to the device. The default IP address is 192.168.1.2.

Menu 24 - System Maintenance

1. System Status

2. System Information and Console Port Speed

3. Log and Trace

7. Upload Firmware

8. Command Interpreter Mode

Enter Menu Selection Number: 8

ras>

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 73 74

Sin comentarios

Zyxel-communications P-870MH-C1 Manual de usuario Pagina 41