ZyXEL Communications P-335 PLUS - V3.60 Guía de usuario descargar pdf (Pagina 40)

100

101

Chapter 5 Initial Setup Example

XS1920 Series User’s Guide

2 In the Static VLAN screen, select ACTIVE, enter a

descriptive name in the Name field and enter 2 in the

VLAN Group ID field for the VLAN2 network.

Note: The VLAN Group ID field in this screen and the VID field in the IP Setup screen

refer to the same VLAN ID.

3 Since the VLAN2 network is connected to port 1 on the Switch, select Fixed to configure port 1 to

be a permanent member of the VLAN only.

4 To ensure that VLAN-unaware devices (such as computers and hubs) can receive frames properly,

clear the TX Tagging check box to set the Switch to remove VLAN tags before sending.

5 Click Add to save the settings to the run-time memory. Settings in the run-time memory are lost

when the Switch’s power is turned off.

5.1.2 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames are

forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 1 so that any untagged frames

received on that port get sent to VLAN 2.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 402 403

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications P-335 PLUS - V3.60 Guía de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red ZyXEL Communications P-335 PLUS - V3.60