
© ZyXEL Communication Corp. Page 5 of 17
Proprietary & Confidential Information
LAN host can't ping DUT's LAN IP or WAN side host's IP when firewall setting is set to
high.
The DUT Domain name is Home.
The default IGMP snooping is "Blocking Mode".
SDK Used:
1.00(AAJZ.0): 412L06 SDK:
Features list:
Modifications in 1.00(AAJZ.0)b8 | 09/13/2013
[FEATURE ENHANCED]
[FEATURE MODIFIED]
1. Support Huawei E303 dongle
-1. Connect to the internet using E303:
Lan IP address of CPE must not be 192.168.1.x.
You can modify it at "Home Networking -> Lan Setup -> Lan IP Setup".
-2. Validate pin-code:
After above setting, you should connect this dongle to CPE and go
to"http://192.168.1.1/html/index.html" page to set pin code.
[BUG FIX]
1. Fixed SPRID #xxxxxx :When two interfacegroupes are both in routing mode, the Guest
wlan clients can't get IP, or even though it can get IP, it still can't connect to the internet.
2. Fixed SPRID #130823002 : When QoS didn't set upstream and enabled at the same time.
The QoS monitor can't work normally.
3. Fixed SPRID #130410046 : PPPoE Passthrough can't work on Ethernet WAN.
2 secs
Primary DNS Secondary DNS
2 secs
Primary DNS
2 secs
Comentarios a estos manuales