ZyXEL Communications B-5000 - Guía de usuario Pagina 154

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 287
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 153
ZyAIR B-5000 User’s Guide
21-2 Configuration Scenarios
Step 7. Set wireless parameters on client stations PC1, PC2 and PC3 as SSID (wireless).
Step 8. Left side stations are transparent to the right side network.
Step 9. The DHCP server assigns IP address to PC1, PC2 and PC3.
Figure 21-1 Wireless Access Bridge
21.1.2 Configure the ZyAIR as a Wireless Access Router with PPP over
Ethernet (PPPoE)
Step 1. Select ACCESS POINT as the operating mode, click NEXT.
Step 2. Click ADVANCED CONFIG.
Step 3. Select Bridging Parameters.
Step 4. Select Disable for Bridge Function.
Step 5. Click FINISH.
Step 6. If you are an PPPoE subscriber, you will need to specify your ISP PPPoE username and
password to enable PPPoE broadband access. Click BASIC CONFIG.
Step 7. Select ISP Parameters.
Vista de pagina 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 286 287

Comentarios a estos manuales

Sin comentarios