ZyXEL Communications B-5000 - Guía de usuario descargar pdf (Pagina 221)

ZyAIR B-5000 User’s Guide

Firmware and Configuration File Maintenance 27-7

27.4 Uploading Software

This section shows you how to upload software.

WARNING!

Do not interrupt the file transfer process as this may PERMANENTLY DAMAGE

YOUR ZyAIR.

27.5 Example 1K Xmodem Firmware Upload Using

HyperTerminal

The ZyAIR supports the uploading of firmware files using TFTP (Trivial File Transfer Protocol) over LAN.

Although TFTP should work over WAN as well, it is not recommended.

To use TFTP, your computer must have both telnet and TFTP clients. To transfer the firmware and the

configuration file, follow the procedure shown next. This procedure is a HyperTerminal example. The

procedure for other serial communications programs should be similar.

Use telnet from your computer to connect to the ZyAIR and log in. Because TFTP does not have any

security checks, the ZyAIR records the IP address of the telnet client and accepts TFTP requests only from

this address.

Follow these steps to upload a new firmware file from your computer to the ZyAIR.

Step 1. Enter HyperTerminal and type [ESC] to go to the status screen. This will reboot the ZyAIR.

Step 2. When the HyperTerminal screen shows EDORAM Testing, enter X to go to a console mode.

Step 3. Type DLS and press [ENTER].

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 286 287

Sin comentarios

ZyXEL Communications B-5000 - Guía de usuario Pagina 221