ZyXEL Communications ES-2024 Series Guía de usuario Pagina 250

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 284
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 249
ES-4024A User’s Guide
Chapter 39 IEEE 802.1Q Tagged VLAN Commands 249
This command turns on GVRP in order to propagate VLAN information beyond the switch.
39.4.5 Disable GVRP
Syntax:
no vlan1q gvrp
This command turns off GVRP so that the switch does not propagate VLAN information to
other switches.
39.5 Port VLAN Commands
You must configure the switch port VLAN settings in config-interface mode.
39.5.1 Set Port VID
Syntax:
pvid <VID>
where
This command sets the default VLAN ID on the port(s).
The following example sets the default VID to 200 on ports 1 to 5.
Figure 167 vlan1q port default vid Command Example
39.5.2 Set Acceptable Frame Type
Syntax:
frame-type <all|tagged|untagged>
where
<VID> =
Specifies the VLAN number between 1 and 4094
ras (config)# interface port-channel 1-5
ras (config-interface)# pvid 200
<all|tagged|unt
agged>
=
Specifies the Ethernet frames (tagged, untagged or all ) the switch
accepts.
Vista de pagina 249
1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 283 284

Comentarios a estos manuales

Sin comentarios