ZyXEL Communications ES-2024 Series Guía de usuario descargar pdf (Pagina 61)

ES-4024A User’s Guide

60 Chapter 5 Initial Setup Example

2 In the Static VLAN screen,

select ACTIVE, enter a

descriptive name in the Name

field and enter 2 in the VLAN

Group ID field for the Sales

network.

Note: The VLAN Group ID field in

this screen and the VID field

in the IP Setup screen refer

to the same VLAN ID.

3 Since the Sales network is

connected to port 10 on the

switch, select Fixed to configure

port 10 to be a permanent

member of the VLAN only.

4 To ensure that VLAN-unaware

devices (such as computers and

hubs) can receive frames

properly, clear the TX Tagging

check box to set the switch to

remove VLAN tags before

sending.

5 Click Add to save the settings.

5.1.4 Setting Port VID

Use PVID to add a tag to incoming untagged frames received on that port so that the frames

are forwarded to the VLAN group that the tag defines.

In the example network, configure 2 as the port VID on port 10 so that any untagged frames

received on that port get sent to VLAN 2.

Figure 26 Initial Setup Network Example: Port VID

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 283 284

Sin comentarios

ZyXEL Communications ES-2024 Series Guía de usuario Pagina 61