ZyXEL Communications G-220 v3 Guía de usuario descargar pdf (Pagina 52)

ZyXEL G-220 v3 User’s Guide

52 Chapter 4 Wireless Station Mode Configuration

4.2 The Link Info Screen

When the ZyXEL utility starts, the Link Info screen displays, showing the current

configuration and connection status of your G-220 v3.

Figure 27 Station Mode: Link Info

The following table describes the labels in this screen.

Table 3 Station Mode: Link Info

LABEL DESCRIPTION

AP Mode

Station Mode

Use the check box to set the G-220 v3 to operate in wireless station or access

point mode. Refer to

Section 1.2.4 on page 25 for more information.

Wireless Network

Status

Profile Name This is the name of the profile you are currently using.

Network Name

(SSID)

The SSID identifies the wireless network to which a wireless station is associated.

This field displays the name of the wireless device to which the G-220 v3 is

associated.

AP MAC Address This field displays the MAC address of the AP or peer computer to which the G-220

v3 is associated.

Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless

network.

Transmission Rate This field displays the current transmission rate of the G-220 v3 in megabits per

second (Mbps).

Security This field displays whether data encryption is activated (WEP (WEP or 802.1x),

TKIP (WPA/WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-

PSK)) or inactive (DISABLE).

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 124 125

Sin comentarios

ZyXEL Communications G-220 v3 Guía de usuario Pagina 52