ZyXEL Communications G-220 v3 Guía de usuario descargar pdf (Pagina 65)

ZyXEL G-220 v3 User’s Guide

Chapter 4 Wireless Station Mode Configuration 65

• If you select the Infrastructure network type in the previous screen, skip to the next step.

If you select the Ad-Hoc network type in the previous screen, a screen displays as

follows. Select a channel number and wireless LAN mode and click Next to continue.

Note: To associate to an ad-hoc network, you must use the same channel as the peer

computer.

Note: At the time of writing the Ad-hoc channel and wireless mode select is not

available on Windows Vista.

Network Type Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a peer

computer.

Next Click Next to go to the next screen.

Exit Click Exit to go back to the previous screen without saving.

Scan Info This table displays the information of the available wireless networks within the

transmission range.

denotes that the wireless device is in infrastructure mode and the wireless

security is activated.

denotes that the wireless device is in infrastructure mode but the wireless

security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the wireless

security is activated.

denotes that the wireless device is in Ad-Hoc mode but the wireless security

is deactivated.

SSID This field displays the SSID (Service Set IDentifier) of each AP or peer device.

Scan Click Scan to search for available wireless devices within transmission range.

Select Select an available wireless device in the table and click Select to add it to this

profile.

Whenever you activate this profile, the G-220 v3 associates to the selected

wireless network only.

Table 12 Station Mode: Profile: Add a New Profile (continued)

LABEL DESCRIPTION

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 124 125

Sin comentarios

ZyXEL Communications G-220 v3 Guía de usuario Pagina 65