ZyXEL Communications G-5100 Guía de usuario descargar pdf (Pagina 3)

ZyAIR G-5100

3

1 Use the installation tool to

connect the ground cable

to the ZyAIR’s frame

ground. Connect the other

end of the ground cable to

an appropriate grounding

system.

2 For initial configuration,

use a cross-over Ethernet

cable to connect the

power injector’s DATA IN

port to a computer.

3 Connect the RJ-45

Ethernet connector end of

the outdoor Ethernet cable

to the power injector’s

POWER & DATA OUT

port.

Connect the other end to

the outdoor Ethernet port

on the bottom of the ZyAIR

(align the connector’s

notch with the port’s inside

bump).

4 Use a power cord to

connect the power

injector’s power socket to

an AC power source.

5 Look at the front of the

power injector. The

POWER LED turns on

first. Then the ACTIVE

LED turns on and the

ZyAIR starts.

1 2 3 4 5 6 7 8 ... 12 13

Comentarios a estos manuales

Sin comentarios