ZyXEL Communications MES-2110 Guía de usuario descargar pdf (Pagina 115)

Chapter 16 IGMP

MES-2110 User’s Guide

115

Note: A port can belong to more than one multicast VLAN. However, IP multicast

group addresses in different multicast VLANs cannot overlap.

Figure 58 Configuration > IGMP Menu > MVR > Group Configuration

The following table describes the labels in this screen.

Table 48 Configuration > IGMP Menu > MVR > Group Configuration

LABEL DESCRIPTION

Group Configuration

Multicast

VLAN ID

Select a multicast VLAN ID (that you configured in the MVR screen) from

the drop-down list box.

Group ID Enter a group number for identification purposes.

Start

Address

Enter the starting IP multicast address of the multicast group in dotted

decimal notation.

Refer to Section 16.1.1 on page 107 for more information on IP multicast

addresses.

Quantity Specify the number of IP addresses to include in the multicast group.

Undo Click this to load your last saved settings.

Add Click Add to save your changes to the Switch’s run-time memory. The

Switch loses these changes if it is turned off or loses power, so use the

Save link on the top navigation panel to save your changes to the non-

volatile memory when you are done configuring.

MVR Group Status

MVLAN This field displays the multicast VLAN ID.

Group ID This field displays the ID number that identifies the multicast group.

Address This field displays the starting IP address of the multicast group.

Delet All Select the check box and click the Delete button to remove all configured

rules.

Delete

Group

Select the check box in the Delete Group field and click Delete to remove

the selected entry(ies) from the table.

Undo Select this to clear the checkbox(es) in the table.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 183 184

Sin comentarios

ZyXEL Communications MES-2110 Guía de usuario Pagina 115