ZyXEL Communications MES-2110 Guía de usuario descargar pdf (Pagina 156)

Chapter 20 Mgmt Config and System Restart Menu

MES-2110 User’s Guide

156

Type the path and file name of the firmware file you wish to upload to the Switch

in the File Name field or click Browse to locate it. Click Start Upgrade to load

the new firmware.

After the firmware upgrade process is complete, the device will automatically

restart. See the System Details > Board Info. screen to verify your current

firmware version number.

20.11 Managing the Configuration File

Backing up your Switch configurations allows you to create various “snap shots” of

your device from which you may restore at a later date. Use this screen to back up

or restore a configuration file. Click Mgmt Config > Configuration File to open

the following screen.

Figure 89 Mgmt Config > Configuration File

Follow the steps below to back up the current Switch configuration to your

computer in this screen.

1 Click Backup Setting.

2 Choose a location to save the file on your computer from the Save in drop-down

list box and type a descriptive name for it in the File name list box. Click Save to

save the configuration file to your computer.

To restore a configuration file, type the path and file name of the configuration file

you wish to restore in the field or click Browse to locate it. After you have

specified the file, click Restore Setting. "config" is the name of the configuration

file on the Switch, so your backup configuration file is automatically renamed

when you restore using this screen.

20.12 Restarting the System

Click System Restart Menu > Restart Option to open the following screen. Use

the Restore button to load the factory default settings, or use the Reset button to

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 183 184

Sin comentarios

ZyXEL Communications MES-2110 Guía de usuario Pagina 156