ZyXEL Communications P-2602HW-63C Guía de usuario Pagina 239

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 465
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 238
Chapter 18 VPN Screens
P-2602H(W)(L)-DxA User’s Guide
239
If the remote secure gateway has a static WAN IP address, enter it in the Secure Gateway
Address field. You may alternatively enter the remote secure gateway’s domain name (if it
has one) in the Secure Gateway Address field.
You can also enter a remote secure gateway’s domain name in the Secure Gateway Address
field if the remote secure gateway has a dynamic WAN IP address and is using DDNS. The
ZyXEL Device has to rebuild the VPN tunnel each time the remote secure gateway’s WAN IP
address changes (there may be a delay until the DDNS servers are updated with the remote
gateway’s new WAN IP address).
18.4.1 Dynamic Secure Gateway Address
If the remote secure gateway has a dynamic WAN IP address and does not use DDNS, enter
0.0.0.0 as the secure gateway’s address. In this case only the remote secure gateway can
initiate SAs. This may be useful for telecommuters initiating a VPN tunnel to the company
network (seeSection 18.18 on page 259for configuration examples).
The Secure Gateway IP Address may be configured as 0.0.0.0 only when using IKE key
management and not Manual key management.
18.5 VPN Setup Screen
The following figure helps explain the main fields in the web configurator.
Figure 139 IPSec Summary Fields
Local and remote IP addresses must be static.
Click Security and VPN to open the VPN Setup screen. This is a menu of your IPSec rules
(tunnels). The IPSec summary menu is read-only. Edit a VPN by selecting an index number
and then configuring its associated submenus.
Vista de pagina 238
1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 464 465

Comentarios a estos manuales

Sin comentarios