ZyXEL Communications P-2602HW-63C Guía de usuario descargar pdf (Pagina 246)

100

101

Chapter 18 VPN Screens

P-2602H(W)(L)-DxA User’s Guide

246

Figure 143 Edit VPN Policies

The following table describes the fields in this screen.

Table 96 Edit VPN Policies

LABEL DESCRIPTION

IPSec Setup

Active Select this check box to activate this VPN policy. This option determines whether

a VPN rule is applied before a packet leaves the firewall.

Keep Alive Select either Yes or No from the drop-down list box.

Select Yes to have the ZyXEL Device automatically reinitiate the SA after the SA

lifetime times out, even if there is no traffic. The remote IPSec router must also

have keep alive enabled in order for this feature to work.

NAT Traversal This function is available if the VPN protocol is ESP.

Select this check box if you want to set up a VPN tunnel when there are NAT

routers between the ZyXEL Device and remote IPSec router. The remote IPSec

router must also enable NAT traversal, and the NAT routers have to forward UDP

port 500 packets to the remote IPSec router behind the NAT router.

Name Type up to 32 characters to identify this VPN policy. You may use any character,

including spaces, but the ZyXEL Device drops trailing spaces.

1 2 ... 241 242 243 244 245 246 247 248 249 250 251 ... 464 465

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications P-2602HW-63C Guía de usuario Pagina 246

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications P-2602HW-63C