ZyXEL Communications P-334WT Información técnica descargar pdf (Pagina 112)

Filter Example

A filter for blocking the web service

● Configuration

Before configuring a filter, you need to know the following information:

1. The outbound packet type (protocol & port number)

2. The source IP address

Generally, the outbound packets for Web service could be as following:

a. HTTP packet, TCP (06) protocol with port number 80

b. DNS packet, TCP (06) protocol with port number 53 or

c. DNS packet, UDP (17) protocol with port number 53

For all workstation on the LAN, the source IP address will be 0.0.0.0. Otherwise, you have to enter an IP

Address for the workstation you want to block. See the procedure for configuring this filter below.

❍ Create a filter set in Menu 21, e.g., set 1

❍ Create three filter rules in Menu 21.1.1, Menu 21.1.2, Menu 21.1.3

■ Rule 1- block the HTTP packet, TCP (06) protocol with port number 80

■ Rule 2- block the DNS packet, TCP (06) protocol with port number 53

■ Rule 3- block the DNS packet, UDP (17) protocol with port number 53

❍ Apply the filter set in menu 4

1. Create a filter set in Menu 21

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 294 295

Sin comentarios

ZyXEL Communications P-334WT Información técnica Pagina 112