ZyXEL Communications P-334WT Información técnica Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 295
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
If the firewall is not turned on we can configure a filter set to block the IP spoofing attacks. The basic
scheme is as follows:
For the input data filter:
Deny packets from the outside that claim to be from the inside
Allow everything that is not spoofing us
Filter rule setup:
Filter type =TCP/IP Filter Rule
Active =Yes
Source IP Addr =a.b.c.d
Source IP Mask =w.x.y.z
Action Matched =Drop
Action Not Matched =Forward
Where a.b.c.d is an IP address on your local network and w.x.y.z is your netmask:
For the output data filters:
Deny bounceback packet
Allow packets that originate from us
Filter rule setup:
Filter Type =TCP/IP Filter Rule
Active =Yes
Destination IP Addr =a.b.c.d
Destination IP Mask =w.x.y.z
Action Matched =Drop
Action No Matched =Forward
Where a.b.c.d is an IP address on your local network and w.x.y.z is your netmask.
All contents copyright (c) 2004 ZyXEL Communications Corporation.
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 294 295

Comentarios a estos manuales

Sin comentarios