ZyXEL Communications U-1496 series Especificaciones descargar pdf (Pagina 19)

MAINTENANCE AE/LZB 119 1889 R1

MAINTENANCE

Note that in the character strings used to program

the SIM, the symbol

∧∧

is used for a single space

between characters. Also note that letters used in

these character strings are case sensitive.

NOTE

APPLICATION SOFTWARE UPDATE

Use the following procedure to download new

application software into a SIM using a customer-supplied

IBM-compatible PC with terminal emulation software (or a

dumb terminal). Skip step 1 if the PC is already set up.

1. Set up the PC as follows:

• Turn on the PC and wait until the DOS command

prompt appears (generally

C:\

• Type

diagpc

to create a subdirectory named

diagpc

under the main (or root) directory of the

PC. (This subdirectory will be used for the SIM

Diagnostic PC program file and the new

application software program file.)

• Copy the

newdiag.exe

file from the supplied

diskette to the new

diagpc

subdirectory in the PC.

(This is the SIM Diagnostic PC program file.)

• Run the terminal emulation program in the PC.

• Select the serial COM port to be used by the PC

(generally COM1 or COM2), and configure it as

follows:

Baud Rate = 19,200

Start Bits = 1

Data Bits = 8

Stop Bits = 1

Parity Bits = None

2. Copy the new application software program file

(generally ending in

-----.hex

) from the supplied

diskette to the new

diagpc

subdirectory in the PC.

3. Select the Download Mode as follows:

• Connect the supplied programming cable (Ericsson

# RPM 113 2514) from J4 on the front of the SIM

to the serial COM port of the PC (or terminal), as

shown in Figure 5.

Personal Computer

IBM-Compatable

Serial COM Port

Program Disks

J4 J3

Programming Cable

RPM 113 2514

Figure 5 - SIM Download Programming Setup

• Press

Ctrl + E

to get the SIM to echo the typed

characters, so that you will be able to see (on the

screen of the PC or terminal) what you type.

• Type

set

∧∧

bbr,bootMode

∧∧

and press the

Enter

key.

• Type

run

∧∧

global,Reset

∧∧

(

∧∧

)

∧∧ and press the

Enter

key.

• After the SIM has finished rebooting and is in the

Download mode of operation, the following

message will be shown on the SIM display:

Boot OS

Idle

• Exit the terminal emulation program in the PC.

4. Download the Application Software to SIM as follows:

• Start up the Diagnostic PC program by running the

file

newdiag.exe

located in the

diagpc

directory of

the PC. The Diagnostic PC Application Window

will then appear on the PC screen.

• From the

Options

pull-down menu, select

Setup

display the Serial Port Configuration window.

• In the Serial Port Configuration window, select the

serial COM port to be used (generally COM1 or

COM2), and configure it as follows:

Baud Rate = 19,200

Start Bits = 1

Data Bits = 8

Stop Bits = 1

Parity Bits = None

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 33 34

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications U-1496 series Especificaciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications U-1496 series