ZyXEL Communications Omni 56K USB Lite Manual de usuario descargar pdf (Pagina 17)

Click New and click on General tab.

Enter the user’s names in the text boxes provided.

Select the User Group (all created User Groups will be listed).

Select User Type (Code or Tag ).

Enter or select the User code / Tag number (generated through Sequential card programming

screen).

Note: If cards or key fobs are un-numbered, they can still be assigned. Make sure that PRO Lite is

On-line and the cursor is in the code or tag window, and present the card or key fob on either of

the readers of the O2LA controller. The number will be read and automatically entered. These

numbers cannot be modified.

Click "Add" to browse and select the picture of the User.

Note: Before adding the picture into the User details screen, the Picture of the User has to be

saved in the system:

Scan the Picture of the User.

Using an Image editing tool, set the Picture size to 23mm (Width) x 28mm (Height).

Set the Pixels of the Image as 69 x 85, Resolution as 30.

Save the Image with a .JPEG extension.

It is very important that for the User Picture to be seen on the Online-monitoring screen when the

User is granted access or denied access, the scanned picture should be set for the size, pixels and

the resolution specified above.

Check Enable Validity period checkbox and specify the validity period for the User code/Tag

to be active.

Check Enable Priority Code checkbox to assign the User code as a Priority code.

Check Duress code checkbox to assign the User code as a Duress code.

10.

Click Contact Details tab and enter the Contact details of the User.

PRO Lite 1.0 Manual

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 66 67

Sin comentarios

ZyXEL Communications Omni 56K USB Lite Manual de usuario Pagina 17