ZyXEL Communications Omni 56K USB Lite Manual de usuario descargar pdf (Pagina 50)

In the communication channel select the type of Communication of the Fingerprint Readers

(Serial or TCP/IP). "Disable" means there are no Fingerprint Readers in the System.

If Serial Communication is selected select the com port number where Fingerprint readers are

connected. The Com Port Number where the Fingerprint Readers are connected MUST be

different from the Com Port Number where the Controller(O2LA) is connected. If TCP/IP is

selected enter the IP address of the TCP/IP Converter of the Fingerprint Readers. The IP

address MUST be different from the IP address of O2LA Converter (if used).

Put a name of the Reader and press "Enter".

Put the Serial Number of the Fingerprint Reader, which is attached to the Reader and written in

the manual (if the serial number is with"-", ex."03-02-11-210", type "030211210") and press

"Enter".

Select the type of the reader and press "Enter"

Select the operation mode: Finger, Finger or Code, Finger and Code and press "Enter". Some

Fingerprint readers do not have keypad, so PIN Codes can not be used.

Click "Save" for configuration to be saved in the software

Click "Setup" for sending the configuration to the selected fingerprint reader.

Through Search option you can conduct search on a number of parameters, and get a list of

Information. For example, it is possible to quickly identify all Users who have A+ve blood group. The

Output information to be listed is also selectable.

PRO Lite 1.0 Manual

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 66 67

Sin comentarios

ZyXEL Communications Omni 56K USB Lite Manual de usuario Pagina 50