
Chapter 3 Status
P-974H/HW Series User’s Guide
35
3.3.0.1 Detailed Startup Procedure Information
The following table describes the status for each initialization step in the
CONNECTION screen.
Table 6 Status: CONNECTION: Startup Procedure
PROCEDURE STATUS COMMENT
Acquire
Downstream
Channel
The status message will display the
frequency in hertz (Hz) of the
channel the ZyXEL Device has locked
onto or is trying to lock onto.
This field displays:
• Locked - The ZyXEL Device has locked
onto the downstream channel.
• In Progress - The ZyXEL Device is
trying to find a downstream channel.
Connectivity
State
This field displays:
• OK - The ZyXEL Device’s cable
connection is up and the upstream
and downstream channels are
established.
• In Progress - The ZyXEL Device
is trying to find and lock onto an
upstream channel.
This field displays:
• Not Synchronized - The ZyXEL Device
can not synchronize the QAM signal
timing/FEC framing/MPEG packets or
obtain downstream channel MAC
address.
• Upstream Parameters Acquired - The
ZyXEL Device is trying to obtain the
upstream channel information from your
cable provider network.
• Ranging Complete - The ZyXEL Device
has successfully adjusted local channel
parameters (such as downstream power/
frequency and channel ID) within
specified ranges.
• IP Complete - The ZyXEL Device has
successfully obtained a WAN IP address
from a DHCP server.
• TOD Established - (Time Of Day) The
ZyXEL Device has obtained the system
time from a time server.
• Security Established - The baseline
privacy was requested in the
configuration file and initialized by the
ZyXEL Device.
• Params Transfer Complete - The
ZyXEL Device has received all
initialization parameters.
• Registration Complete - The ZyXEL
Device has successfully registered to the
cable provider network for Internet
access.
• Operational - The ZyXEL Device is has
successfully completed all the
initialization steps and is working fine.
• Access Denied - The ZyXEL Device was
unable to perform one or more of the
initialization steps.
Comentarios a estos manuales