ZyXEL Communications SMG-700 Guía de usuario Pagina 39

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 38
Chapter 3 Status
P-974H/HW Series User’s Guide
39
SW Upgrade
Failed Before
Download -
Server not
Present
Error Your ZyXEL Device has made 16 unsuccessful attempts to download
a new ZyXEL software image from the TFTP server (CMTS or other
TFTP server). After 16 attempts your cable modem aborts the
upgrade procedure. This error message might also occur if your
cable modem has received a fatal TFTP server error.
SW upgrade
Failed after
download -
Incompatible
SW file
Error An upgrade of your ZyXEL Device software failed because the
downloaded image file was either the wrong image, type, or was
corrupted during file transfer.
UCD invalid or
channel
unusable
Critical The cable modem received an Upstream Channel Descriptor (UCD)
message from the CMTS, but it contains invalid information or
specifies an upstream channel that is unusable.
A transmit
opportunity was
missed because
the MAP arrived
too late
Information Your ZyXEL Device missed a transmit opportunity because the
Bandwidth Allocation MAP (one slot of the Time Division
Multiplexing) signal arrived too late for your ZyXEL Device to use it.
DHCP FAILED -
Discover sent,
no offer received
Critical Your ZyXEL Device sent a DHCP discovery broadcast message to the
cable operator’s CMTS, but no DHCP server or DHCP relay agent
replied with a DHCP offer response message.
DHCP FAILED -
Request sent,
No response
Critical Your ZyXEL Device sent a DHCP discovery broadcast message to the
cable operator’s CMTS, and received a DHCP offer message in
response from the cable operator, but when it sent a DHCP request
message to the indicated DHCP server, it did not receive a DHCP
response message.
No UCD's
Received -
Timeout
Critical Your ZyXEL Device has not received any periodic Upstream Channel
Descriptor (UCD) messages from the CMTS within the specified
timeout period.
Unicast Ranging
Received Abort
Response - Re-
initializing MAC
Critical Your ZyXEL Device is online and has sent a periodic Ranging Request
(RNG-REQ) message to the CMTS, but it received an Abort Ranging
reply instead. Your ZyXEL Device will reset its cable interface and
restart the registration process in response. Note that this is not an
ethernet MAC frame type.
SYNC Timing
Synchronization
failure - Loss of
Sync
Critical Your ZyXEL Device had locked on to the downstream channel for a
period of time, but then the channel lock was lost and it was unable
to be reacquired within five SYNC signal periods. Your ZyXEL Device
has reset its cable interface in response to this condition.
No Maintenance
Broadcasts for
Ranging
opportunities
received - T2
time-out
Critical Your ZyXEL Device did not receive a broadcast maintenance
opportunity in which to transmit a Ranging Request (RNG-REQ)
within the required T2 timeout period (approximately 10 seconds).
Your ZyXEL Device will reset its cable interface and restart the
registration process.
Table 9 Event Log: Log Description (continued)
LOG NAME SEVERITY DESCRIPTION
Vista de pagina 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 115 116

Comentarios a estos manuales

Sin comentarios