Zyxel-communications 200 Series Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 902
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
126
Click Network > Interface > Ethernet and the wan1 interface’s Edit icon. Configure the IP
address, subnet mask, and default gateway settings as follows and click OK.
Figure 47 Network > Interface > Ethernet > Edit wan1
6.1.2 How to Configure the OPT Interface for a Local Network
Here is how to set the opt interface for a separate local network. It uses 192.168.4.1 as its IP
address and has a DHCP server to distribute IP addresses to connected DHCP clients.
1 Click Network > Interface > Ethernet and the opt interface’s Edit icon. Set the IP
Address to 192.168.4.1 and the Subnet Mask to 255.255.255.0. Zone to WA N and
select Get Automatically as shown next. Then click More Settings.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 901 902

Comentarios a estos manuales

Sin comentarios