Zyxel-communications 200 Series Manual de usuario Pagina 165

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 902
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 164
Chapter 6 Tutorials
ZyWALL USG 100/200 Series User’s Guide
165
Figure 119 Device HA > General: Master ZyWALL Example
6.9.3 How to Configure the Backup ZyWALL
1 Connect a computer to ZyWALL B’s lan1 interface and log into its web configurator.
Connect ZyWALL B to the Internet and subscribe it to the same subscription services
(like content filtering and anti-virus) to which ZyWALL A is subscribed. See Chapter 8
on page 185 for more on the subscription services.
2 In ZyWALL B click Device HA > Active-Passive Mode. Click lan1’s Edit icon.
3 Configure 192.168.1.5 as the Management IP and 255.255.255.0 as the Subnet Mask.
Click OK.
Figure 120 Device HA > Active-Passive Mode > Edit: Backup ZyWALL Example
4 Set the Device Role to Backup. Turn on monitoring for the wan1 and lan1 interfaces.
Set the Synchronization Server Address to 192.168.1.1, the Port to 21, and the
Password to “mySyncPassword”. Select Auto Synchronize and set the Interval to 60.
Click Apply.
Vista de pagina 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 901 902

Comentarios a estos manuales

Sin comentarios