ZyXEL Communications U-1496 series Manual de usuario descargar pdf (Pagina 54)

34 CONNECT 7200

35 CONNECT 9600

36 CONNECT 12000

37 CONNECT 14400

38 CONNECT 16800

39 CONNECT 19200

Z0 Reset modem and load user profile 0.

Z1 Reset modem and load user profile 1.

Z2 Reset modem and load user profile 2.

Z3 Reset modem and load user profile 3.

Z4 Reset modem and load factory settings, also set factory default as power-on

profile.

Note: Factory default (Z4) is the default power-on profile when the modem is shipped out of the

factory. ATZn also sets profile n to be the power-on profile. ATZn sets FCLASS=0.

+++ Escape sequence code, entered in data state, wait for modem to return to

command state.

$ Basic command summary HELP.

&$ Extended AT& command summary HELP.

*$ Extended AT* command summary HELP.

EXTENDED AT& COMMAND SET

&B0 DTE/DCE rate follows link rate. (If the communication software package has

auto baud rate detection, please turn it ON.) (See also S44b6.)

+&B1 DTE/DCE rate fixed at DTE setting, range from 300 to 76.8Kbps (Default). (See

also S18, S20, S44b6.)

&C0 Assume that the carrier is always present (force CD always ON).

+ &C1 CD tracks presence of carrier (Default). (See also S38b3, S42b7.)

&D0 Ignore DTR signal, assume DTR always ON.

&D1 108.1, DTR OFF-ON transition causes dial of the default number. (See also

*Dn).

+ &D2 108.2, Data Terminal Ready, DTR OFF causes the modem to hang up and

return to command state (Default).

&D3 Same as &D2 but DTR OFF also causes the loading and reset from profile 0.

&F Load factory settings to RAM as active configuration.

+ &G0 No guard tone (within USA, Canada) (Default).

&G1 Reserved.

&G2 1800 Hz guard tone.

&H0 Flow control disabled.

&H1 Reserved.

&H2 Reserved.

+ &H3 Hardware CTS/RTS flow control (Default).

&H4 Software XON/XOFF flow control.

&H5 Reserved.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 107 108

Sin comentarios

ZyXEL Communications U-1496 series Manual de usuario Pagina 54