ZyXEL Communications 650 Series Guía de usuario descargar pdf (Pagina 20)

Prestige 650H/HW

Table 5 SUA/NAT Server

LABEL DESCRIPTION

Start Port

No.

Type a port number in this field. To forward only one port, type the port number again in the

End Port field. To forward a series of ports, type the start port number here and the end port

number in the End Port field.

End Port

No.

Type a port number in this field. To forward only one port, type the port number in the Start

Port field above and then type it again in this field. To forward a series of ports, type the last

port number in a series that begins with the port number in the Start Port field above.

IP Address Enter the inside IP address of the server here.

5.5 UPnP Overview

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for

simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a

network, obtain an IP address, convey its capabilities and learn about other devices on the network.

In turn, a device can leave a network smoothly and automatically when it is no longer in use.

All UPnP-enabled devices may communicate freely with each other without additional

configuration. Disable UPnP if this is not your intention.

Windows ME and Windows XP support UPnP. See the Microsoft website for information about

other Microsoft operating systems.

Make sure you apply Microsoft’s UPnP security patch before enabling the

UPnP feature. Refer to the Microsoft website.

5.6 Configuring UPnP

Click Advanced Setup and then UPnP to open the UPnP screen.

Figure 18 UPnP

The following table describes the fields in this screen.

1 2 ... 15 16 17 18 19 20 21 22 23

Sin comentarios

ZyXEL Communications 650 Series Guía de usuario Pagina 20