ZyXEL Communications P-2602HWL-D3A Manual de usuario descargar pdf (Pagina 12)

ZyXEL Confidential

340ajk4c0

12/35

open Open ADSL line

opencmd Open ADSL line with specific standard

opmode Show the operational mode

perfdata Show performance information,CRC,FEC, error

seconds..

rdata [start] [length] Read DSP CTRLE registers 512 bytes

reset Reset ADSL modem, and must reload the modem

code again

selftest

long ADSL long loop test

short ADSL short loop test

status ADSL status (ex: up, down or wait for init)

version ADSL version information

vendorid ADSL vendor information

utopia Show ADSL utopia information

cellcnt Show ADSL cell counter

display

shutdown Show the counter of rate adaptive mechanism

happening

rateup Show real status that rate adaptive mechanism

happened

rateadap [on|off] Turn on/off rate adaptive mechanism

dumpcondition [on|off] Turn on/off online debug information of rate

adaptive mechanism

sampletime [mins] Tune the sample time of rate adaptive mechanism

noisegt [dB] if noise margin is 3db greater than before, and

rate is worse than before, then system will do “L1

shutdown RA3”, default is 3db

noisemargin [dB] if noise margin is greater than this value, and rate

is worse than before, then system will do “L1

shutdown RA3”, default is 8db

persisttime [time] when the adaptive condition is matched system

will continue to monitor the time period

“persisttime” before doing “L1 shutdown RA3”,

default is 30 seconds

timeinterval [mins] when “L1 shutdown RA3” is done twice, and still

can’t reach the max rate which system recorded,

it will delay a time period that the period base

time is”timeinterval” before starting again. The

time-based default is 2 hrs

defectcheck [on|off] Turn on/off detect table checking, default is on

txgain [value] Set the CTRLE register (0xc3), the value is from

0xfa to 0x06

targetnoise [value] Set the CTRLE register (0xc4), the value is from

0xfa to 0x06

maxtonelimit [value] Set the CTRLE register (0xc5), the value is from

0xfa to 0x06

rxgain [value] Set the CTRLE register (0xc6), the value is from

0xfa to 0x06

txoutputpwr [value] Set the CTRLE register (0xc7), the value is from

0xfa to 0x06

rxoutputpwr [value] Set the CTRLE register (0xc8), the value is from

0xfa to 0x06

maxoutputpwr [value] Set the CTRLE register (0xc9), the value is from

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 34 35

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications P-2602HWL-D3A Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications P-2602HWL-D3A

Related products and manuals for Laser/LED printers Xerox Phaser 3610