ZyXEL Communications P-2602HWL-D3A Manual de usuario descargar pdf (Pagina 23)

ZyXEL Confidential

340ajk4c0

23/35

sys save

Save all the parameters which will include menu1, menu 3.2

LAN, menu 4 or menu 11 WAN, menu 12 static route, menu

15 NAT server set, menu 21 filter sets, menu 22 SNMP,

menu 24.11 remote management and 3.5 Wireless LAN

wan backup mechanism [dsl | icmp] Set wan backup mechanism to DSL link or ICMP Menu 2

wan backup addr [index] [IP addr] Set wan ip address <index> Menu 2

wan backup tolerance [number] Set keepalive fail tolerance Menu 2

wan backup recovery [interval(sec)] Set recovery interval Menu 2

wan backup timeout [number] Set ICMP timeout Menu 2

wan backup save Save wan backup related parameters Menu 2

wan backup display Display wan backup configurations Menu 2

wan tredir active [on|off] Set traffic redirect on/off Menu 2.1

wan tredir ip [IP addr] Set traffic redirect gateway IP address Menu 2.1

wan tredir metric [number] Set traffic redirect metric Menu 2.1

wan tredir save

Save traffic redirect related parameters

** Have to apply “wan backup save” command thereafter

Menu 2.1

wan tredir display Display traffic redirect configurations Menu 2.1

lan index [1|2|3]

1: Select main LAN Interface

2: Select IP Alias 1

3: Select IP Alias 2

Select a LAN interface to edit

Menu 3.2

lan active [on|off] Turn on or off on IP Alias Interface Menu 3.2.1

lan ipaddr [address] [subnet mask]

Set LAN IP address and subnet mask

Example:

> lan ipaddr 192.168.1.1 255.255.255.0

Menu 3.2

Set LAN IP RIP mode and RIP version, if you choose none in

the first parameter, the second parameter is also necessary

Menu 3.2

lan multicast [none|igmpv1|igmpv2] Set LAN IP multicast mode Menu 3.2

lan filter [incoming|outgoing] [tcpip|generic]

[set#1] [set#2] [set#3] [set#4]

Set LAN filter to be incoming/outgoing or protocol /device

and the filter set could be 1-12, 0 means empty

Example:

Lan filter incoming tcpip 1 0 0 0

Menu 3.1

lan dhcp mode [server|relay|none] Set DHCP mode to be”server”, “relay”, “none” Menu 3.2

lan dhcp server dnsserver [pri dns] [sec dns] Set primary and secondary LAN DNS server Menu 3.2

lan dhcp server pool [start-address] [num] Set DHCP start address and pool size Menu 3.2

lan dhcp server gateway [IP address] Set DHCP gateway Menu 3.2

lan dhcp server netmask [subnet mask] Set DHCP subnet mask Menu 3.2

lan dhcp server leasetime [second] Set DHCP lease time Menu 3.2

lan dhcp server renewaltime [second] Set DHCP renew time Menu 3.2

lan dhcp server rebindtime [second] Set DHCP rebind time Menu 3.2

lan dhcp relay server [IP address] Set IP address of DHCP relay server Menu 3.2

lan display Display LAN or IP alias parameters Display Menu 3

lan clear Clear the Working Buffer

lan save Save LAN related parameters

wan node index [1-8]

Set the node pointer to specific wan profile. If you want to set

WAN profile, please use this command first, system will use

the index number for pointing to specific PVC (remote node),

and for consequent commands reference, if index = 1 means

it’s ISP node

Menu 11.1

wan node clear Clear the parameters of the temporary WAN profile Menu 11.1

wan node ispname [ISP name] Enable the name of wan node Menu 11.1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 34 35

Comentarios a estos manuales

Sin comentarios

ZyXEL Communications P-2602HWL-D3A Manual de usuario Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Redes ZyXEL Communications P-2602HWL-D3A