ZyXEL Communications G-3000H Manual de usuario descargar pdf (Pagina 124)

Wireless Troubleshooting

● Is it a hardware problem

● How can I check to be sure if I am interfered or not

● If I've confirmed it is an interference problem. What should I do

● What should I do if I have low signal or high noise

● Unable to associate to the access point

● Unable to authenticate to the access point

● Unable to get an IP address via DHCP

● Unable to transmit traffic

● What should I get back to my technical support for analysis

Is it a hardware problem ?

If following symptoms happen on the access point

● None of the LEDs turn on when I plug in the power adapter

Make sure you are using the supplied power adapter and that it is plugged in to an appropriate

power source. Check that the power source is turned on. If the problem persists, you may have a

hardware problem. In this case, you should contact your local vendor.

● The ZyAIR reboots automatically sometimes

The supplied power to ZyAIR is too low. Check that the ZyAIR is receiving enough power. 　

How can I check to be sure if I am interfered or not ?

There may not be an easy or quick answer to this. One thing to notice first is whether the

problems are continuous or intermittent. Interference usually occurs intermittently, or else it

would have likely been noticed when the link was first commissioned.

If I've confirmed it is an interference problem. What should I do?

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/trbst/Wireless%20Troubleshooting.htm (1 of 5)2005/7/15 下午 02:15:01

1 2 ... 119 120 121 122 123 124 125 126 127 128

Sin comentarios

ZyXEL Communications G-3000H Manual de usuario Pagina 124