ZyXEL Communications G-3000H Manual de usuario descargar pdf (Pagina 48)

Roaming

Menu 3.5.2 - Roaming Configuration

Active= Yes

Port #= 3517

Press ENTER to Confirm or ESC to Cancel:

field description

Active

Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the ZyAIR if you have

two or more ZyAIRs on the same subnet.

Port # Enter the port number to communicate roaming information between access points. The port

number must be the same on all access points. The default is 3517. Make sure this port is not used

by other services.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel”

to save your configuration or press [ESC] to cancel and go back to the previous screen.

4. Requirements for Roaming

The following requirements must be met in order for wireless stations to roam between the coverage areas.

1. All the access points and wireless stations must be on the same subnet, configured with the same ESSID and security settings such as WEP.

2. If IEEE 802.1X user authentication is enabled and to be done locally on the access point, the new access point must have the user profile for

the wireless station.

3. The adjacent access points should use different radio channels when their coverage areas overlap to provide seamless roaming.

4. All access points must use the same port number to relay roaming information.

● Configuration AP1 for Roaming using Web configurator

To Enable the roaming feature if you have two or more ZyAIRs on the same subnet. Follow the steps below to allow roaming on your ZyAIR.

1. From the Web configurator main menu, Click Advanced->wireless than select roaming tab in wireless page.

file:///D|/work%20info/Support%20Note/ZyAIR_G3000H/app/Roaming.htm (4 of 7)2005/7/15 下午 02:14:50

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 127 128

Sin comentarios

ZyXEL Communications G-3000H Manual de usuario Pagina 48