ZyXEL Communications NBG334W Guía de usuario descargar pdf (Pagina 65)

Chapter 4 Station Mode

NWD2105 User’s Guide

2 If you select the Infrastructure network type in the previous screen, skip to step

3. If you select the Ad-Hoc network type in the previous screen, a screen displays

as follows. Select a Channel number and Wireless Mode and click Next to

continue.

Note: To associate to an ad-hoc network, you must use the same channel as the peer

computer.

Figure 40 Profile: Wireless Settings

Exit Click Exit to go back to the previous screen without saving.

Scan Info This table displays the information of the available wireless networks

within the transmission range.

denotes that the wireless device is in infrastructure mode and

the wireless security is activated.

denotes that the wireless device is in infrastructure mode but the

wireless security is deactivated.

denotes that the wireless device is in Ad-Hoc mode and the

wireless security is activated.

denotes that the wireless device is in Ad-Hoc mode but the

wireless security is deactivated.

SSID This field displays the SSID (Service Set IDentifier) of each AP or peer

device.

Scan Click Scan to search for available wireless devices within transmission

range.

Select Select an available wireless device in the table and click Select to add it

to this profile.

Whenever you activate this profile, the NWD2105 associates to the

selected wireless network only.

Table 15 Profile: Add a New Profile (continued)

LABEL DESCRIPTION

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 188 189

Sin comentarios

ZyXEL Communications NBG334W Guía de usuario Pagina 65