ZyXEL Communications NBG334W Guía de usuario descargar pdf (Pagina 92)

Chapter 7 Troubleshooting

NWD2105 User’s Guide

7.2 Accessing the ZyXEL Utility

I cannot access the ZyXEL Utility

1 Make sure the NWD2105 is properly inserted and the LEDs are on. Refer to the

Quick Start Guide for information on how to properly connect the NWD2105.

2 Use the Device Manager to check for possible hardware conflicts. Click Start >

Settings > Control Panel > System > Hardware > Device Manager. Verify

the status of the NWD2105 under Network Adapter (steps may vary depending

on the version of Windows).

3 Install the NWD2105 on another computer.

4 If the error persists, you may have a hardware problem. In this case, you should

contact your vendor.

7.3 Link Quality

The link quality and/or signal strength is poor.

1 Scan for and connect to another AP with a better link quality using the Site

Survey screen.

2 Move your computer closer to the AP or the peer computer(s) within the

transmission range.

3 There may be too much radio interference (for example from a microwave oven,

or another AP using the same channel) around your wireless network. Lower the

output power of each AP.

4 Make sure there are not too many wireless stations connected to a wireless

network.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 188 189

Sin comentarios

ZyXEL Communications NBG334W Guía de usuario Pagina 92