ZyXEL Communications NWD-170 - Guía de usuario descargar pdf (Pagina 69)

Chapter 4 ZyXEL Utility - Station Mode

NWD-211AN User’s Guide

Note: To associate to an ad-hoc network, you must use the same channel as the peer

computer.

Figure 40 Profile: Wireless Settings

The following table describes the labels in this screen.

3 If you selected Infrastructure network type in the first screen, select WEP,

WPA, WPA2, WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to

enable data encryption. If you selected Ad-Hoc network type in the first screen,

you can use only WEP encryption method. Otherwise, select DISABLE to allow

the NWD-211AN to communicate with the access points or other peer wireless

computers without any data encryption, and skip to step 5.

Figure 41 Profile: Wireless Settings

Table 16 Profile: Wireless Settings

LABEL DESCRIPTION

Wireless

Settings

Channel Select a channel number from the drop-down list box. To associate to

an ad-hoc network, you must use the same channel as the peer

computer.

Wireless Mode This is the wireless standard the NWD-211AN uses. In Ad-Hoc mode,

you can use only 802.11b or 802.11g.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 174 175

Sin comentarios

ZyXEL Communications NWD-170 - Guía de usuario Pagina 69