ZyXEL Communications P-2612HW-F1 - Especificaciones descargar pdf (Pagina 9)

Internet Connection

A typical Internet access application of the P-2812HNU(L)-Fx is shown below. For a

small office, some components need to be checked before accessing the Internet.

 Before we begin.

The device is shipped with the following factory defaults:

1. IP address = 192.168.1.1, subnet mask = 255.255.255.0 (24 bits).

2. DHCP server enabled with IP pool starting from 192.168.1.33.

3. Default user’s username/password = user/1234.

 Setting up the PC (Windows OS).

1. Ethernet Connection

 All PCs must have an Ethernet adapter card installed.

2. TCP/IP Installation

You must first install the TCP/IP software on each PC before you can use it for the

Internet access. If you have already installed the TCP/IP protocol, go to the next

section to configure it; otherwise, follow these steps to install:

 In the Control Panel/Network window, click Add button.

 In the Select Network Component Type windows, select Protocol and click

Add.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 82 83

Sin comentarios

ZyXEL Communications P-2612HW-F1 - Especificaciones Pagina 9