ZyXEL Communications VANTAGE RADIUS 50 Guía de usuario descargar pdf (Pagina 17)

Vantage RADIUS 50 Quick Start Guide

7 Troubleshooting

PROBLEM CORRECTIVE ACTION

None of the LEDs turn

on when you turn on

the device.

Make sure that you have the correct power adaptor connected to the device and

plugged in to an appropriate power source. Check all cable connections.

If the LEDs still do not turn on, you may have a hardware problem. In this case, you

should contact your local vendor.

Username or

password invalid

Check that you are using the correct username and password and that you have a valid

account. Note that the password is case sensitive.

My server won’t

authenticate my

account.

If your AP uses PEAP authentication, check that you have the correct CA ROOT

Certificate. Changes made to the RADIUS’ Server screen require a new certificate to be

downloaded.

If your AP uses MD5 authentication, check that your wireless settings are set up to use

Static Wep Keys. Consult your Wireless AP’s user’s guide for more information.

The SYS LED

continuously blinks

The firmware may be corrupt (possible upgrade failure) and should be replaced.

1 2 ... 12 13 14 15 16 17

Sin comentarios

ZyXEL Communications VANTAGE RADIUS 50 Guía de usuario Pagina 17