ZyXEL Communications VANTAGE RADIUS 50 Guía de usuario descargar pdf (Pagina 4)

Vantage RADIUS 50 Quick Start Guide

Vantage RADIUS uses low voltage. Make sure you have the correct power

adapter before connecting to the device.

2.2 Front Panel

LABEL DESCRIPTION

ETHERNET

10/100

Connect a computer or hub to this port with an Ethernet cable. This port is auto-

negotiating (can connect at 10 or 100Mbps) and auto-sensing (automatically adjusts to

straight-through or crossover Ethernet cable).

RESET You only need to use this button if you’ve forgotten the device’s password. It returns the

device to the factory defaults (username is ‘admin’, password is ‘1234’, IP address

192.168.1.3 etc.).

2.3 LED Descriptions

LABEL COLOR STATUS DESCRIPTION

On Vantage RADIUS is receiving power. PWR Green

Off Vantage RADIUS is not receiving power.

On Vantage RADIUS is online.

Blinking Vantage RADIUS is restarting.

SYS Green

Off Make sure that you have the correct power adaptor connected to the

device and plugged in to an appropriate power source. Check all cable

connections.

If the LED still does not turn on, you may have a hardware problem. In

this case, you should contact your local vendor.

On Vantage RADIUS has established a 100Mbps network connection.

Blinking Vantage RADIUS is transmitting or receiving data across the LAN Port.

Amber

Off Vantage RADIUS doesn’t have a 100Mbps Ethernet connection.

On Vantage RADIUS has established a 10Mbps network connection.

Blinking Vantage RADIUS is transmitting or receiving data across the LAN Port.

ETHERNET

Green

Off Vantage RADIUS doesn’t have a 10Mbps Ethernet connection.

1 2 3 4 5 6 7 8 9 ... 16 17

Sin comentarios

ZyXEL Communications VANTAGE RADIUS 50 Guía de usuario Pagina 4