
NSA-2400 User’s Guide
45 Chapter 3 Status Screens
3.4 System Info
Use this screen to view detailed NSA system and hardware information.
Figure 18 System Info
The following table describes the labels in this screen.
Table 11 System Info
LABEL DESCRIPTION
System Name This displays the name which helps you find the NSA on the network. Click
the update link to go to the Network> TCP/IP screen. Click the Modify
button after the Server Name label in that screen to go to the Network >
Windows/CIFS in which you can change the Server Name.
You can enter up to 15 alphanumeric characters with minus signs allowed
but not as an end character. The name must begin with an alphabetic
character (a-z) and is not case sensitive.
Model Name This displays the NSA model name.
Firmware Version This is the NSA firmware version and the date created. Click the update
link to go to the Maintenance > Firmware Upgrade screen from which
you can upload new firmware.
CPU Info This displays the type of CPU the NSA has.
Flash Memory Size This displays the amount of non-volatile flash memory. Flash memory is
used for storing NSA firmware and configuration files.
RAM Memory Size This displays the amount of (volatile) RAM. The NSA uses RAM during
system runtime.
Hardware Reset Button This displays whether the reset button is enabled or not. Use the reset
button to restore the factory default user name to “admin”, default
password to “1234”, default IP address to 192.168.1.3 with subnet mask of
255.255.255.0
. You must enable the reset button in the Maintenance >
Configuration screen before you can use it.
IP Address This displays the NSA’s IP address.
IP Subnet Mask This displays the NSA’s subnet mask.
Default Gateway This displays the NSA’s default gateway.
Comentarios a estos manuales