ZyXEL Communications NSA-2400 Guía de usuario descargar pdf (Pagina 89)

NSA-2400 User’s Guide

89 Chapter 6 Storage

Disk Name This field shows disk1, disk2, disk3 and/or disk4 for disks installed in the

NSA disk trays labelled 1, 2, 3 and 4 respectively.

It shows USB1, USB2 and/or USB3 for external USB disks; USB ports are

not numbered, so USB1 represents the first device you connected to the

NSA, USB2 the second and so on. If you’re unsure of which external disk

is connected to which port, then use the Locate icon to cause a LED on

the external disk to blink.

Model Name This is the hard drive model number that uniquely identifies a hard drive.

Volume This field shows which volume the disk belongs to. It shows No Volume if

it does not (yet) belong to a volume.

Disk Configuration This shows RAID 0, RAID 1, RAID 5, SINGLE depending on what the

volume to which the internal disk belongs to is configured. It shows None if

the internal disk does not belong to a volume.

Capacity This field shows the size of the hard disk.

Status This field shows if the hard disk is functioning normally.

Action Click the Scan Disk icon to scan a hard disk drive for bad sectors and file

system errors.

Note: All users must disconnect from the NSA before the

disk scan can begin.

For external hard disks, there are additional Disconnect, Locate and

Initialize icons.

Make sure to click the Disconnect icon before you remove an external

drive so that you do not lose data that is being transferred to or from that

hard drive.

Click the Locate icon to cause the corresponding USB LED on the NSA to

blink.

Click the Initialize icon for the NSA to create a volume on the (external)

hard drive.

Table 30 Storage > Disk (continued)

LABEL DESCRIPTION

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 159 160

Sin comentarios

ZyXEL Communications NSA-2400 Guía de usuario Pagina 89