ZyXEL Communications NSA-2400 Guía de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
NSA-2400 User’s Guide
71 Chapter 5 Network
5.3 Network Overview Screen
Figure 28 Network > Overview
The following table describes the labels in this screen.
Table 23 Network > Overview
LABEL DESCRIPTION
IP Information
Mode This field displays whether the NSA is receiving an IP address from a
DHCP server (Dynamic) or whether it is assigned a static IP address.
DHCP Server If the NSA is receiving an IP address from a DHCP server, this field
displays the IP address of the DHCP (Dynamic Host Configuration
Protocol) server. See Section 5.2.2 on page 70 for more details.
IP Address This field displays the NSA IP address.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. If
you select Dynamic IP in the TCP/IP screen the subnet mask will be
assigned by the DHCP server. If you select Static IP then your subnet
mask will be what you type into this field. See Section 5.2.1 on page 69 for
more details about IP subnet mask.
Default Gateway If you select Dynamic IP in the TCP/IP screen the default gateway will be
assigned by the DHCP server. If you select Static IP then you must type a
gateway IP address in this field.
Windows/CIFS Information
Server Name This is the name of the NSA device.
Mode This shows the Windows/CIFS mode, either Workgroup or Domain.
Workgroup Name This field displays your workgroup name.
Domain Protocol This field displays the windows domain protocol you are using. Select NT4
Domain or Active Directory Domain in the Windows/CIFS screen.
Domain This is the domain name you have entered.
FTP Information
Enable FTP This field displays whether or not the NSA allows FTP connections.
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 159 160

Comentarios a estos manuales

Sin comentarios