ZyXEL Communications AC240 Guía de usuario Pagina 110

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 154
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 109
Vantage RADIUS User’s Guide
A-2 Troubleshooting
Chart A-2 Troubleshooting the Ethernet Interface
PROBLEM CORRECTIVE ACTION
I cannot ping any
computer on the
LAN.
If the ETHERNET LED on the front panel is off, check the Ethernet cable
connections between your Vantage RADIUS and the Ethernet device.
Check the Ethernet cable connections between the Ethernet device and the LAN
computers.
Check for faulty Ethernet cables.
Make sure the LAN computer’s Ethernet adapter is installed and working properly.
Verify that the IP address and the subnet mask of Vantage RADIUS, the Ethernet
device and the LAN computers are on the same subnet.
Problems with the Password
Chart A-3 Troubleshooting the Password
PROBLEM CORRECTIVE ACTION
I cannot access
Vantage RADIUS.
The Password and Username fields are case-sensitive. Make sure that you enter
the correct password and username using the proper casing.
Use the RESET button on the front panel of Vantage RADIUS to restore the factory
default configuration file (hold this button in for about 5 seconds or until the SYS LED
starts to blink). This will restore all of the factory defaults including the password.
Check that the access method is not disabled in the REMOTE MANAGEMENT
screen.
Check that the computer IP address is allowed to access Vantage RADIUS.
For HTTPS, check the port number has not changed in the REMOTE
MANAGEMENT screen.
Vista de pagina 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 153 154

Comentarios a estos manuales

Sin comentarios