Zyxel-communications Internet Security Gateway ZyWALL 2 Series Manual de usuario Pagina 578

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 614
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 577
ZyWALL 2 User’s Guide
L-4 Firewall Commands
Chart L-1 Firewall Commands
FUNCTION COMMAND DESCRIPTION
Config edit firewall set <set #>
default-permit <forward | block>
This command sets whether a packet is dropped or
allowed through, when it does not meet a rule within
the set.
Config edit firewall set <set #>
icmp-timeout <seconds>
This command sets the time period to allow an
ICMP session to wait for the ICMP response.
Config edit firewall set <set #>
udp-idle-timeout <seconds>
This command sets how long a UDP connection is
allowed to remain inactive before the ZyWALL
considers the connection closed.
Config edit firewall set <set #>
connection-timeout <seconds>
This command sets how long ZyWALL waits for a
TCP session to be established before dropping the
session.
Config edit firewall set <set #>
fin-wait-timeout <seconds>
This command sets how long the ZyWALL leaves a
TCP session open after the firewall detects a FIN-
exchange (indicating the end of the TCP session).
Config edit firewall set <set #>
tcp-idle-timeout <seconds>
This command sets how long ZyWALL lets an
inactive TCP connection remain open before
considering it closed.
Config edit firewall set <set #>
log <yes | no>
This command sets whether or not the ZyWALL
creates logs for packets that match the firewall’s
default rule set.
R
R
u
u
l
l
e
e
s
s
Config edit firewall set <set #>
rule <rule #> permit <forward |
block>
This command sets whether packets that match this
rule are dropped or allowed through.
Config edit firewall set <set #>
rule <rule #> active <yes | no>
This command sets whether a rule is enabled or
not.
Vista de pagina 577
1 2 ... 573 574 575 576 577 578 579 580 581 582 583 ... 613 614

Comentarios a estos manuales

Sin comentarios