Zyxel-communications P-2302HWL-P1 Series Manual de usuario descargar pdf (Pagina 124)

100

101

P-2302HW/HWL-P1 Series User’s Guide

124 Chapter 7 LAN

Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer

on the LAN. To access this screen, click Network > LAN > Static DHCP.

Figure 60 Network > LAN > Static DHCP

Each field is described in the following table.

7.2.4 LAN Client List Screen

Note: This screen is empty if the DHCP server is not enabled. You can enable it in

Network > LAN > DHCP Setup.

Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on

the LAN. To access this screen, click Network > LAN > Client List.

Table 50 Network > LAN > Static DHCP

LABEL DESCRIPTION

# This field is a sequential value. It is not associated with a specific entry.

MAC Address

Enter the MAC address of the computer to which you want the ZyXEL Device to

assign the same IP address.

IP Address

Enter the IP address you want the ZyXEL Device to assign to the computer.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel Click this to set every field in this screen to its last-saved value.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 336 337

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2302HWL-P1 Series Manual de usuario Pagina 124

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2302HWL-P1 Series