Zyxel-communications P-2302HWL-P1 Series Manual de usuario descargar pdf (Pagina 96)

P-2302HW/HWL-P1 Series User’s Guide

96 Chapter 5 Wireless LAN

5.4.3 WPA(2)-PSK

In order to configure and enable WPA-PSK authentication; click Network > Wireless LAN to

display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list.

Figure 42 Wireless: WPA(2)-PSK

The following table describes the wireless LAN security labels in this screen.

Table 37 Wireless: WPA(2)-PSK

LABEL DESCRIPTION

Security Mode Choose WPA-PSK or WPA2-PSK from the drop-down list box.

WPA Compatible This field is only available for WPA2-PSK. Select this if you want the ZyXEL Device

to support WPA-PSK and WPA2-PSK simultaneously.

Pre-Shared Key The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The

only difference between the two is that WPA(2)-PSK uses a simple common

password, instead of user-specific credentials.

Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including

spaces and symbols).

ReAuthentication

Timer (in seconds)

Specify how often wireless stations have to resend usernames and passwords in

order to stay connected. Enter a time interval between 10 and 9999 seconds. The

default time interval is 1800 seconds (30 minutes).

Note: If wireless station authentication is done using a RADIUS

server, the reauthentication timer on the RADIUS server has

priority.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 336 337

Sin comentarios

Zyxel-communications P-2302HWL-P1 Series Manual de usuario Pagina 96