Zyxel-communications P-2302HWL-P1 Series Manual de usuario descargar pdf (Pagina 55)

P-2302HW/HWL-P1 Series User’s Guide

Chapter 3 Wizard Setup 55

Figure 12 Wireless LAN

The following table describes the labels in this screen.

3.2.3.2 Manually Assign a WPA or WPA2 key

Choose Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with customized

key) in the Wireless LAN setup screen to set up a Pre-Shared Key.

Table 7 Wireless LAN Setup Wizard 2

LABEL DESCRIPTION

Name(SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless

LAN.

If you change this field on the ZyXEL Device, make sure all wireless stations use the

same SSID in order to access the network.

Channel

Selection

The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a

channel. Select a channel ID that is not already in use by a neighboring device.

Security Select Auto(WPA-PSK with self-generated key), if you want OTIST to configure a

WPA key for you.

Select Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with

customized key) to configure a Pre-Shared Key (WPA-PSK). Choose this option only

if your wireless clients support WPA or WPA2. See Section 3.2.3.2 on page 55 for

more information.

Select Basic(WEP) to configure a WEP Key. See Section 3.2.3.3 on page 56 for more

information.

Select None to have no wireless LAN security configured and your network is

accessible to any wireless networking device that is within range.

Back Click Back to display the previous screen.

Next Click Next to proceed to the next screen.

Exit Click Exit to close the wizard screen without saving.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 336 337

Sin comentarios

Zyxel-communications P-2302HWL-P1 Series Manual de usuario Pagina 55