Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario descargar pdf (Pagina 114)

100

101

Chapter 8 Wireless LAN

P-2802H(W)(L)-I Series User’s Guide

114

2 If an OTIST-enabled wireless device loses its wireless connection for more than ten

seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually

have the wireless device search for an OTIST-enabled AP, there is no timeout; click

Cancel in the OTIST progress screen to stop the search.)

3 After the wireless device finds an OTIST-enabled AP, you must click Start in the

ZyXEL Device’s Network > Wireless LAN > OTIST screen or hold in the RESET

button on the ZyXEL Device for three seconds to transfer the settings again.

4 If you change the SSID or the keys on the ZyXEL Devices after using OTIST, you need

to run OTIST again or enter them manually in the wireless device(s).

5 If you configure OTIST to generate a WPA-PSK key, this key changes each time you run

OTIST. Therefore, if a new wireless device joins your wireless network, you need to run

OTIST on the AP and ALL wireless devices again.

8.6 MAC Filter

Use this screen to change your ZyXEL Device’s MAC filter settings. Click Network >

Wireless LAN > MAC Filter. The screen appears as shown.

Figure 61 MAC Address Filter

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 417 418

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario Pagina 114

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2802H(W)(L)-I Series