Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario descargar pdf (Pagina 268)

Chapter 19 Remote Management Configuration

P-2802H(W)(L)-I Series User’s Guide

268

The following table describes the labels in this screen.

19.9 Configuring DNS

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and

vice versa. Refer to Chapter 7 on page 89 for background information.

Click Advanced > Remote MGMT > DNS to change your ZyXEL Device’s DNS settings.

Use this screen to set from which IP address the ZyXEL Device will accept DNS queries and

on which interface it can send them your ZyXEL Device’s DNS settings. This feature is not

available when the ZyXEL Device is set to bridge mode.

Table 109 Remote Management: SNMP

LABEL DESCRIPTION

SNMP

Port You may change the server port number for a service if needed, however you

must use the same port number in order to use that service for remote

management.

Access Status Select the interface(s) through which a computer may access the ZyXEL Device

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the

ZyXEL Device using this service.

Select All to allow any computer to access the ZyXEL Device using this service.

Choose Selected to just allow the computer with the IP address that you specify

to access the ZyXEL Device using this service.

SNMP Configuration

Get Community Enter the Get Community, which is the password for the incoming Get and

GetNext requests from the management station. The default is public and

allows all requests.

Set Community Enter the Set community, which is the password for incoming Set requests

from the management station. The default is public and allows all requests.

Trap

Community Type the trap community, which is the password sent with each trap to the

SNMP manager. The default is public and allows all requests.

Destination Type the IP address of the station to send your SNMP traps to.

Apply Click Apply to save your customized settings and exit this screen.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 417 418

Sin comentarios

Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario Pagina 268