Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario descargar pdf (Pagina 125)

100

101

Chapter 9 Network Address Translation (NAT) Screens

P-2802H(W)(L)-I Series User’s Guide

125

The following table describes the fields in this screen.

9.6 Address Mapping

" The Address Mapping screen is available only when you select Full Feature

in the NAT > General screen.

Ordering your rules is important because the ZyXEL Device applies the rules in the order that

you specify. When a rule matches the current packet, the ZyXEL Device takes the

corresponding action and the remaining rules are ignored.

To change your ZyXEL Device’s address mapping settings, click Network > NAT > Address

Mapping to open the following screen.

Table 42 Port Forwarding Rule Setup

LABEL DESCRIPTION

Active Click this check box to enable the rule.

Service Name Enter a name to identify this port-forwarding rule.

Start Port Enter a port number in this field.

To forward only one port, enter the port number again in the End Port field.

To forward a series of ports, enter the start port number here and the end port

number in the End Port field.

End Port Enter a port number in this field.

To forward only one port, enter the port number again in the Start Port field above

and then enter it again in this field.

To forward a series of ports, enter the last port number in a series that begins with

the port number in the Start Port field above.

Server IP

Address

Enter the inside IP address of the server here.

Back Click Back to return to the previous screen.

Apply Click Apply to save your changes back to the ZyXEL Device.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 417 418

Comentarios a estos manuales

Sin comentarios

Zyxel-communications P-2802H(W)(L)-I Series Manual de usuario Pagina 125

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Zyxel-communications P-2802H(W)(L)-I Series