ZyXEL Communications Prestige 681 Guía de usuario Pagina 117

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 148
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 116
Prestige 681 SDSL Router
System Maintenance 11-3
Table 11-1 System Maintenance - Status Menu Fields
Field Description
NodeName This is the remote node name that you determined in Menu 11.1.
Status
Shows the status of the remote node – either
Up
or
N/A
.
TXPkts The number of packets transmitted to this remote node.
RXPkts The number of packets received from this remote node.
Errors The number of error packets on this connection.
Tx B/s Shows the transmission rate in bytes per second.
Rx B/s Shows the receiving rate in bytes per second.
Up Time Time this channel has been connected to the remote node.
Ethernet
Status Shows the current status of the LAN.
Tx Pkts The number of transmitted packets to the LAN.
Rx Pkts The number of received packets from the LAN.
Collision Number of collisions.
WAN
Line Status Shows the current status of the SDSL line, which can be
Synchronizing,
or
Normal
.
Transfer Rate Shows the SDSL line speed.
CPU Load Specifies the percentage of CPU utilization. When the data rate is
over 1MB, excessive CPU loading degrades performance.
Press Command
1 - Reset Counters Press 1 to reset all the above statistics to 0.
2 – Reset SDSL Press 2 to reset the SDSL connection.
ESC - Exit Press ESC to go back to Menu 24.
Menu 24.2 System Information and Console Port Speed
is as follows.
Figure 11-3 System Information and Console Port Speed
Press 1 to display the next screen,
Menu 24.2.1 - System Maintenance - Information.
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Vista de pagina 116
1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 147 148

Comentarios a estos manuales

Sin comentarios