ZyXEL Communications Prestige 681 Guía de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 148
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
Prestige 681 SDSL Router
Remote Node TCP/IP Configuration 6-1
Chapter 6:
Remote Node TCP/IP Configuration
This chapter shows you how to configure the
TCP/IP parameters of a remote node.
A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as
depicted in the following diagram.
6.1 LAN-to-LAN Application
Figure 6-1 TCP/IP LAN-to-LAN Application
For the branch office, you need to configure a remote node in order to dial out to the headquarters.
Additionally, you may also need to define static routes if some services reside beyond the immediate
remote LAN.
6.1.1 Editing TCP/IP Options
Follow the steps below to edit
Menu 11.3 - Remote Node Network Layer Options
shown next.
In Menu 11.1, move the cursor to the
Edit IP/IPX/Bridge
, then press the [SPACE BAR] to toggle and set
the value to
Yes
. Press
[ENTER]
to open
Menu 11.3 - Network Layer Options
.
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 147 148

Comentarios a estos manuales

Sin comentarios